+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    Registered User
    Join Date
    02-20-2004
    Posts
    4

    Unhappy Why do I have to keep on setting the touch pad locations.

    Hello- Just got the 7135, and I've had to set up the touch pad settings at least 30 times. ( You know, where you have to touch the targets in the corners with your stylus)

    In fact, every time I tap the phone icon on the lower touchpad (upper right) , I am taken to "set-up" again. I'm going crazy. I can't find a master set-up option that will disable this feature, or where I can check what the "phone icon" is set to.

    Any help out there??

    Thanks!!!

    Ben
    Serenity NOW!!

  2. #2
    Registered User
    Join Date
    02-20-2004
    Posts
    4

    more info

    The process I am taken to is the same as the Welcome Application....

    So basically, my phone icon on the bottom touchpad has become a welcome access icon.

    Lucky me....
    Serenity NOW!!

  3. #3
    Registered User
    Join Date
    02-20-2004
    Posts
    4

    Talking Figured it out....

    I switched the buttons some how.... I am sane again.
    Serenity NOW!!

  4. #4
    Registered User nabour's Avatar
    Join Date
    08-23-2003
    Location
    Arizona
    Posts
    225
    In the main application screen there is a choice called "Preferences PDA" and under that there is an option for "buttons".

    Also, in the digitizer screen -- also listed under "Preferences PDA" there is an option not to continue to show the screen on resets.

    It's fun getting to know this PDA. So many options, so little time.

    Hope you're having fun.

    Barb

  5. #5
    Registered User
    Join Date
    02-20-2004
    Posts
    2
    This function will be set by a corrupt or previous Palm device setting. To verify it is removed: Hard Reset and remove the saved_prefs file from the Palm Backup folder. Or better yet, remove the whole backup folder to remove all previous Palm settings (network connections, etc.) These links will help you:

    Hard Reset
    http://support.kyocera-wireless.com/...c/kyo1022.htm?

    Previous Palm Files
    http://support.kyocera-wireless.com/...c/kyo1055.htm?

    Rename Backup Folder
    http://support.kyocera-wireless.com/...c/kyo1022.htm?

  6. #6
    Registered User tlaudio's Avatar
    Join Date
    09-19-2003
    Location
    Missouri
    Posts
    280

    To remove....

    To remove the Digitizer set-up screen on every soft-reset:

    Find the "Welcome" Program (Palm Side)

    Go through all the stylus settings

    When step 4 of 4 screen appears,
    Make sure to tap on "Don't Show Again"

    On the next "soft-reset" it will not display the digitizer set-up screen.

    Hope this helps!

    TL

  7. #7
    Registered User
    Join Date
    02-24-2004
    Posts
    4

    Touch screen resteting

    Charge the batt for a long time, internal back-up will not fully charge until main batt is charged which seems to take forever, but once fully charged you'll be fine

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts