+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    Sill a Victim of SRCP tyedye's Avatar
    Join Date
    04-19-2004
    Location
    Poconos, PA
    Posts
    64

    Question What Is the Treo Case Screw Size?

    I have searched through the Treo 600
    and Treo 650 forums and am surprised
    that this question has not been asked
    before.

    What size (all measurements) are the
    Torx screws that holed the Treo together?

    I know that the HEAD is a Torx-6 (T6). I
    also know that the driver used is the same
    size.

    What are all the dimensions of the Torx-6 screw?
    (Thread count, width, length, etc.?)

    Thanks to ALL for any help!

  2. #2
    Registered User TheBundo's Avatar
    Join Date
    03-06-2006
    Posts
    581
    Take one into a hardware store and either use their gauge or test it on various sizes of nuts. Simple

  3. #3
    Sill a Victim of SRCP tyedye's Avatar
    Join Date
    04-19-2004
    Location
    Poconos, PA
    Posts
    64
    Thanks for the tip.

    However, I have no way to get to a hardware
    store. It is a bit far and I am in the boonies.

    Anyone else know the size?

  4. #4
    Registered User
    Join Date
    01-27-2004
    Posts
    7
    Quote Originally Posted by tyedye View Post
    I know that the HEAD is a Torx-6 (T6). I
    also know that the driver used is the same
    size.
    Actually, it is a T5. I dropped and broke mine while on vacation and spent the better part of a day trying to locate one. Wasn't able to get ahold of one until I returned home.

    I found a disassembly manual with little words but great photos at : http://www.palm.com/us/support/conta...st_Treo650.pdf

    I don't recall it listing screw sizes but you can check though.

    Good Luck!

  5. #5
    Sill a Victim of SRCP tyedye's Avatar
    Join Date
    04-19-2004
    Location
    Poconos, PA
    Posts
    64
    Thanks for the manual link. I'm sure it will come in
    handy soon.

    As for the screw size, it is not listed in the manual.

    Any other ideas?

    -Thanks again


    Quote Originally Posted by Centurion View Post
    Actually, it is a T5. I dropped and broke mine while on vacation and spent the better part of a day trying to locate one. Wasn't able to get ahold of one until I returned home.

    I found a disassembly manual with little words but great photos at : http://www.palm.com/us/support/conta...st_Treo650.pdf

    I don't recall it listing screw sizes but you can check though.

    Good Luck!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts